Quantcast

No new browser window opened up after clicked on the line number.

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

No new browser window opened up after clicked on the line number.

Gary Yang

Hi David,


I use Perforce and Codestriker 1.9.6. In the The Codestriker Guide 1.9.5 at the section, 3.5.1. Viewing a Topic. The last paragraph says below:

Each file is broken up into a series of "deltas". At the head of each delta block, for both the old and new versions of the file, there is an indication of what line number the delta started at. In this situation, clicking on the "Line 24" link on the left hand side, will open a new browser window, which will contain the complete original contents of codestriker/codestriker.pl, anchored at line 24. Clicking on the "Line 22" link on the right hand side will contain the complete contents of codestriker/codestriker.pl will all of the proposed changes applied.

However, when I clicked on the line number, there is no new browser window opened up. Actually, there is no hyperlink line under the line number. It is different than what I see in the manual. Can you please let me know the reason?


Thanks,


Gary



     

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/codestriker-user
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: No new browser window opened up after clicked on the line number.

David Sitsky
Administrator
This happens when the diff you have loaded in doesn't match the
repository associated with the topic.  If you have the repository set
to your Perforce depot, and the diff text matches the depot path, then
those links will become active again.  You'll need to create new
topics whenever you change the repository string in codestriker.conf.

Cheers,
David

On Thu, May 7, 2009 at 7:56 AM, Gary Yang <[hidden email]> wrote:

>
> Hi David,
>
>
> I use Perforce and Codestriker 1.9.6. In the The Codestriker Guide 1.9.5 at the section, 3.5.1. Viewing a Topic. The last paragraph says below:
>
> Each file is broken up into a series of "deltas". At the head of each delta block, for both the old and new versions of the file, there is an indication of what line number the delta started at. In this situation, clicking on the "Line 24" link on the left hand side, will open a new browser window, which will contain the complete original contents of codestriker/codestriker.pl, anchored at line 24. Clicking on the "Line 22" link on the right hand side will contain the complete contents of codestriker/codestriker.pl will all of the proposed changes applied.
>
> However, when I clicked on the line number, there is no new browser window opened up. Actually, there is no hyperlink line under the line number. It is different than what I see in the manual. Can you please let me know the reason?
>
>
> Thanks,
>
>
> Gary
>
>
>
>
>

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/codestriker-user
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: No new browser window opened up after clicked on the line number.

Gary Yang
In reply to this post by Gary Yang


Hi David,

I do not understand your explaination. From my understanding, the diff text matches the depot path. There is a hyperlinked parallel line. A window popped up after I clicked on the Paraelle. It shows two differen revisons of the file. I tried it again. Still, there is no hyperlink with the line number. Below is the detail.


in codestriker.conf:

'perforce:apache:apache1234@ipcswsvdcp4:1666',

The Perforce client workspace spec:
p4 client -o
View:
        //training/... //gary_pc_training/training/...


p4 diff -du
==== //training/main.c#10 - c:\workspace\gary_pc_training\training\main.c ====
@@ -30,7 +30,6 @@

 #include <sys\ppc440sp_board.h>
 #include <ppclib.h>
-#include <asynclib.h>
 #include <stdio.h>
 #include <sys\tcpiplib.h>
 #include <serial.h>
@@ -41,12 +40,13 @@
 /* SDRAM MICRON */
 #define SDRAM_MICRON           0x2C

-#define SDRAM_TRUE  1
+#define SDRAM_TRUE 2
 #define SDRyAM_FALSE 0
 #define SDRAM_DDR1  1
 #define SDRAM_DDR2  2
 #define SDRAM_NONE  0
 #define MAXDIMMS 2
+#define max     3
 #define MAXRANKS 2     /* Changes le 12/01/05 pour 1.6*/
 #define MAXBANKSPERDIMM 8
 #define MAXRANKSPERDIMM 2
==== //training/test_dir/mainTG.c#1 - c:\workspace\gary_pc_training\training\test_dir\mainTG.c ====
@@ -20,8 +20,7 @@
 #---------------------------------------------------------------------------*/
 /* Perform DQS calibration and test memory */

-#include <sys\ppc440sp_board.h>
-#include <ppclib.h>
+#include <ppc.h>
 #include <asynclib.h>
 #include <stdio.h>
 #include <sys\tcpiplib.h>
@@ -34,6 +33,7 @@
 #define SDRAM_MICRON           0x2C

 #define SDRAM_TRUE  1
+#define SDRAM_TRUE  9
 #define SDRyAM_FALSE 0
 #define SDRAM_DDR1  1
 #define SDRAM_DDR2  2


Thanks,


Gary

--- On Wed, 5/6/09, David Sitsky <[hidden email]> wrote:

> From: David Sitsky <[hidden email]>
> Subject: Re: No new browser window opened up after clicked on the line number.
> To: "Gary Yang" <[hidden email]>
> Cc: [hidden email]
> Date: Wednesday, May 6, 2009, 3:14 PM
> This happens when the diff you have
> loaded in doesn't match the
> repository associated with the topic.  If you have the
> repository set
> to your Perforce depot, and the diff text matches the depot
> path, then
> those links will become active again.  You'll need to
> create new
> topics whenever you change the repository string in
> codestriker.conf.
>
> Cheers,
> David
>
> On Thu, May 7, 2009 at 7:56 AM, Gary Yang <[hidden email]>
> wrote:
> >
> > Hi David,
> >
> >
> > I use Perforce and Codestriker 1.9.6. In the The
> Codestriker Guide 1.9.5 at the section, 3.5.1. Viewing a
> Topic. The last paragraph says below:
> >
> > Each file is broken up into a series of "deltas". At
> the head of each delta block, for both the old and new
> versions of the file, there is an indication of what line
> number the delta started at. In this situation, clicking on
> the "Line 24" link on the left hand side, will open a new
> browser window, which will contain the complete original
> contents of codestriker/codestriker.pl, anchored at line 24.
> Clicking on the "Line 22" link on the right hand side will
> contain the complete contents of codestriker/codestriker.pl
> will all of the proposed changes applied.
> >
> > However, when I clicked on the line number, there is
> no new browser window opened up. Actually, there is no
> hyperlink line under the line number. It is different than
> what I see in the manual. Can you please let me know the
> reason?
> >
> >
> > Thanks,
> >
> >
> > Gary
> >
> >
> >
> >
> >
>


     

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/codestriker-user
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: No new browser window opened up after clicked on the line number.

David Sitsky
Administrator
The more recent versions of Codestriker removed the explicit
underlines form the line numbers.  If you click on them, a little
inline popup window should appear, allowing you to enter a comment.

If this is not happening, make sure you are at least using 1.9.8.
Also try it with firefox, to make sure its not a browser issue.

On Thu, May 7, 2009 at 10:00 AM, Gary Yang <[hidden email]> wrote:

>
>
> Hi David,
>
> I do not understand your explaination. From my understanding, the diff text matches the depot path. There is a hyperlinked parallel line. A window popped up after I clicked on the Paraelle. It shows two differen revisons of the file. I tried it again. Still, there is no hyperlink with the line number. Below is the detail.
>
>
> in codestriker.conf:
>
> 'perforce:apache:apache1234@ipcswsvdcp4:1666',
>
> The Perforce client workspace spec:
> p4 client -o
> View:
>        //training/... //gary_pc_training/training/...
>
>
> p4 diff -du
> ==== //training/main.c#10 - c:\workspace\gary_pc_training\training\main.c ====
> @@ -30,7 +30,6 @@
>
>  #include <sys\ppc440sp_board.h>
>  #include <ppclib.h>
> -#include <asynclib.h>
>  #include <stdio.h>
>  #include <sys\tcpiplib.h>
>  #include <serial.h>
> @@ -41,12 +40,13 @@
>  /* SDRAM MICRON */
>  #define SDRAM_MICRON           0x2C
>
> -#define SDRAM_TRUE  1
> +#define SDRAM_TRUE 2
>  #define SDRyAM_FALSE 0
>  #define SDRAM_DDR1  1
>  #define SDRAM_DDR2  2
>  #define SDRAM_NONE  0
>  #define MAXDIMMS 2
> +#define max     3
>  #define MAXRANKS 2     /* Changes le 12/01/05 pour 1.6*/
>  #define MAXBANKSPERDIMM 8
>  #define MAXRANKSPERDIMM 2
> ==== //training/test_dir/mainTG.c#1 - c:\workspace\gary_pc_training\training\test_dir\mainTG.c ====
> @@ -20,8 +20,7 @@
>  #---------------------------------------------------------------------------*/
>  /* Perform DQS calibration and test memory */
>
> -#include <sys\ppc440sp_board.h>
> -#include <ppclib.h>
> +#include <ppc.h>
>  #include <asynclib.h>
>  #include <stdio.h>
>  #include <sys\tcpiplib.h>
> @@ -34,6 +33,7 @@
>  #define SDRAM_MICRON           0x2C
>
>  #define SDRAM_TRUE  1
> +#define SDRAM_TRUE  9
>  #define SDRyAM_FALSE 0
>  #define SDRAM_DDR1  1
>  #define SDRAM_DDR2  2
>
>
> Thanks,
>
>
> Gary
>
> --- On Wed, 5/6/09, David Sitsky <[hidden email]> wrote:
>
>> From: David Sitsky <[hidden email]>
>> Subject: Re: No new browser window opened up after clicked on the line number.
>> To: "Gary Yang" <[hidden email]>
>> Cc: [hidden email]
>> Date: Wednesday, May 6, 2009, 3:14 PM
>> This happens when the diff you have
>> loaded in doesn't match the
>> repository associated with the topic.  If you have the
>> repository set
>> to your Perforce depot, and the diff text matches the depot
>> path, then
>> those links will become active again.  You'll need to
>> create new
>> topics whenever you change the repository string in
>> codestriker.conf.
>>
>> Cheers,
>> David
>>
>> On Thu, May 7, 2009 at 7:56 AM, Gary Yang <[hidden email]>
>> wrote:
>> >
>> > Hi David,
>> >
>> >
>> > I use Perforce and Codestriker 1.9.6. In the The
>> Codestriker Guide 1.9.5 at the section, 3.5.1. Viewing a
>> Topic. The last paragraph says below:
>> >
>> > Each file is broken up into a series of "deltas". At
>> the head of each delta block, for both the old and new
>> versions of the file, there is an indication of what line
>> number the delta started at. In this situation, clicking on
>> the "Line 24" link on the left hand side, will open a new
>> browser window, which will contain the complete original
>> contents of codestriker/codestriker.pl, anchored at line 24.
>> Clicking on the "Line 22" link on the right hand side will
>> contain the complete contents of codestriker/codestriker.pl
>> will all of the proposed changes applied.
>> >
>> > However, when I clicked on the line number, there is
>> no new browser window opened up. Actually, there is no
>> hyperlink line under the line number. It is different than
>> what I see in the manual. Can you please let me know the
>> reason?
>> >
>> >
>> > Thanks,
>> >
>> >
>> > Gary
>> >
>> >
>> >
>> >
>> >
>>
>
>
>
>

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/codestriker-user
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: No new browser window opened up after clicked on the line number.

Gary Yang
In reply to this post by Gary Yang

David,

I am not talking about the line numbers used to add comments. It works fine. I am talking about the Line number next to the "Parallel".

At the Codestriker Guide, 3.5.3 Viewing Complete old/new Files. It syas:

As mention in Section 3.5.1, it is possible to view the entire contents of a file in a review in its original form, or in its proposed form, or side-by-side depending on whether the "Line" or "Parallel" link was selected.
......
When a "Line" link is clicked, a new browser window will come up with the contents of the file.


I am able to click on the Parallel. It pops up a new browser to show me both original and changed revision. However, the Line number next to the Parallel there is no hyperlink with it. Nothing poped up after I clicked on it. Can you please tell me how to fix it?

Thanks.



--- On Wed, 5/6/09, David Sitsky <[hidden email]> wrote:

> From: David Sitsky <[hidden email]>
> Subject: Re: No new browser window opened up after clicked on the line number.
> To: "Gary Yang" <[hidden email]>
> Cc: [hidden email]
> Date: Wednesday, May 6, 2009, 5:45 PM
> The more recent versions of
> Codestriker removed the explicit
> underlines form the line numbers.  If you click on
> them, a little
> inline popup window should appear, allowing you to enter a
> comment.
>
> If this is not happening, make sure you are at least using
> 1.9.8.
> Also try it with firefox, to make sure its not a browser
> issue.
>
> On Thu, May 7, 2009 at 10:00 AM, Gary Yang <[hidden email]>
> wrote:
> >
> >
> > Hi David,
> >
> > I do not understand your explaination. From my
> understanding, the diff text matches the depot path. There
> is a hyperlinked parallel line. A window popped up after I
> clicked on the Paraelle. It shows two differen revisons of
> the file. I tried it again. Still, there is no hyperlink
> with the line number. Below is the detail.
> >
> >
> > in codestriker.conf:
> >
> > 'perforce:apache:apache1234@ipcswsvdcp4:1666',
> >
> > The Perforce client workspace spec:
> > p4 client -o
> > View:
> >        //training/...
> //gary_pc_training/training/...
> >
> >
> > p4 diff -du
> > ==== //training/main.c#10 -
> c:\workspace\gary_pc_training\training\main.c ====
> > @@ -30,7 +30,6 @@
> >
> >  #include <sys\ppc440sp_board.h>
> >  #include <ppclib.h>
> > -#include <asynclib.h>
> >  #include <stdio.h>
> >  #include <sys\tcpiplib.h>
> >  #include <serial.h>
> > @@ -41,12 +40,13 @@
> >  /* SDRAM MICRON */
> >  #define SDRAM_MICRON           0x2C
> >
> > -#define SDRAM_TRUE  1
> > +#define SDRAM_TRUE 2
> >  #define SDRyAM_FALSE 0
> >  #define SDRAM_DDR1  1
> >  #define SDRAM_DDR2  2
> >  #define SDRAM_NONE  0
> >  #define MAXDIMMS 2
> > +#define max     3
> >  #define MAXRANKS 2     /* Changes le 12/01/05 pour
> 1.6*/
> >  #define MAXBANKSPERDIMM 8
> >  #define MAXRANKSPERDIMM 2
> > ==== //training/test_dir/mainTG.c#1 -
> c:\workspace\gary_pc_training\training\test_dir\mainTG.c
> ====
> > @@ -20,8 +20,7 @@
> >
>  #---------------------------------------------------------------------------*/
> >  /* Perform DQS calibration and test memory */
> >
> > -#include <sys\ppc440sp_board.h>
> > -#include <ppclib.h>
> > +#include <ppc.h>
> >  #include <asynclib.h>
> >  #include <stdio.h>
> >  #include <sys\tcpiplib.h>
> > @@ -34,6 +33,7 @@
> >  #define SDRAM_MICRON           0x2C
> >
> >  #define SDRAM_TRUE  1
> > +#define SDRAM_TRUE  9
> >  #define SDRyAM_FALSE 0
> >  #define SDRAM_DDR1  1
> >  #define SDRAM_DDR2  2
> >
> >
> > Thanks,
> >
> >
> > Gary
> >
> > --- On Wed, 5/6/09, David Sitsky <[hidden email]>
> wrote:
> >
> >> From: David Sitsky <[hidden email]>
> >> Subject: Re: No new browser window opened up after
> clicked on the line number.
> >> To: "Gary Yang" <[hidden email]>
> >> Cc: [hidden email]
> >> Date: Wednesday, May 6, 2009, 3:14 PM
> >> This happens when the diff you have
> >> loaded in doesn't match the
> >> repository associated with the topic.  If you
> have the
> >> repository set
> >> to your Perforce depot, and the diff text matches
> the depot
> >> path, then
> >> those links will become active again.  You'll
> need to
> >> create new
> >> topics whenever you change the repository string
> in
> >> codestriker.conf.
> >>
> >> Cheers,
> >> David
> >>
> >> On Thu, May 7, 2009 at 7:56 AM, Gary Yang <[hidden email]>
> >> wrote:
> >> >
> >> > Hi David,
> >> >
> >> >
> >> > I use Perforce and Codestriker 1.9.6. In the
> The
> >> Codestriker Guide 1.9.5 at the section, 3.5.1.
> Viewing a
> >> Topic. The last paragraph says below:
> >> >
> >> > Each file is broken up into a series of
> "deltas". At
> >> the head of each delta block, for both the old and
> new
> >> versions of the file, there is an indication of
> what line
> >> number the delta started at. In this situation,
> clicking on
> >> the "Line 24" link on the left hand side, will
> open a new
> >> browser window, which will contain the complete
> original
> >> contents of codestriker/codestriker.pl, anchored
> at line 24.
> >> Clicking on the "Line 22" link on the right hand
> side will
> >> contain the complete contents of
> codestriker/codestriker.pl
> >> will all of the proposed changes applied.
> >> >
> >> > However, when I clicked on the line number,
> there is
> >> no new browser window opened up. Actually, there
> is no
> >> hyperlink line under the line number. It is
> different than
> >> what I see in the manual. Can you please let me
> know the
> >> reason?
> >> >
> >> >
> >> > Thanks,
> >> >
> >> >
> >> > Gary
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> >
>


     

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/codestriker-user
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: No new browser window opened up after clicked on the line number.

Gary Yang
In reply to this post by Gary Yang

David,

I upgraded the codestriker to 1.9.8. However, there is no hyperlink with the "Line number" next to "Parallel". I am clueless.


Gary

--- On Thu, 5/7/09, Gary Yang <[hidden email]> wrote:

> From: Gary Yang <[hidden email]>
> Subject: Re: [Codestriker-user] No new browser window opened up after clicked on the line number.
> To: "David Sitsky" <[hidden email]>
> Cc: [hidden email]
> Date: Thursday, May 7, 2009, 11:28 AM
>
> David,
>
> I am not talking about the line numbers used to add
> comments. It works fine. I am talking about the Line number
> next to the "Parallel".
>
> At the Codestriker Guide, 3.5.3 Viewing Complete old/new
> Files. It syas:
>
> As mention in Section 3.5.1, it is possible to view the
> entire contents of a file in a review in its original form,
> or in its proposed form, or side-by-side depending on
> whether the "Line" or "Parallel" link was selected.
> ......
> When a "Line" link is clicked, a new browser window will
> come up with the contents of the file.
>
>
> I am able to click on the Parallel. It pops up a new
> browser to show me both original and changed revision.
> However, the Line number next to the Parallel there is no
> hyperlink with it. Nothing poped up after I clicked on it.
> Can you please tell me how to fix it?
>
> Thanks.
>
>
>
> --- On Wed, 5/6/09, David Sitsky <[hidden email]>
> wrote:
>
> > From: David Sitsky <[hidden email]>
> > Subject: Re: No new browser window opened up after
> clicked on the line number.
> > To: "Gary Yang" <[hidden email]>
> > Cc: [hidden email]
> > Date: Wednesday, May 6, 2009, 5:45 PM
> > The more recent versions of
> > Codestriker removed the explicit
> > underlines form the line numbers.  If you click on
> > them, a little
> > inline popup window should appear, allowing you to
> enter a
> > comment.
> >
> > If this is not happening, make sure you are at least
> using
> > 1.9.8.
> > Also try it with firefox, to make sure its not a
> browser
> > issue.
> >
> > On Thu, May 7, 2009 at 10:00 AM, Gary Yang <[hidden email]>
> > wrote:
> > >
> > >
> > > Hi David,
> > >
> > > I do not understand your explaination. From my
> > understanding, the diff text matches the depot path.
> There
> > is a hyperlinked parallel line. A window popped up
> after I
> > clicked on the Paraelle. It shows two differen
> revisons of
> > the file. I tried it again. Still, there is no
> hyperlink
> > with the line number. Below is the detail.
> > >
> > >
> > > in codestriker.conf:
> > >
> > > 'perforce:apache:apache1234@ipcswsvdcp4:1666',
> > >
> > > The Perforce client workspace spec:
> > > p4 client -o
> > > View:
> > >        //training/...
> > //gary_pc_training/training/...
> > >
> > >
> > > p4 diff -du
> > > ==== //training/main.c#10 -
> > c:\workspace\gary_pc_training\training\main.c ====
> > > @@ -30,7 +30,6 @@
> > >
> > >  #include <sys\ppc440sp_board.h>
> > >  #include <ppclib.h>
> > > -#include <asynclib.h>
> > >  #include <stdio.h>
> > >  #include <sys\tcpiplib.h>
> > >  #include <serial.h>
> > > @@ -41,12 +40,13 @@
> > >  /* SDRAM MICRON */
> > >  #define SDRAM_MICRON           0x2C
> > >
> > > -#define SDRAM_TRUE  1
> > > +#define SDRAM_TRUE 2
> > >  #define SDRyAM_FALSE 0
> > >  #define SDRAM_DDR1  1
> > >  #define SDRAM_DDR2  2
> > >  #define SDRAM_NONE  0
> > >  #define MAXDIMMS 2
> > > +#define max     3
> > >  #define MAXRANKS 2     /* Changes le 12/01/05
> pour
> > 1.6*/
> > >  #define MAXBANKSPERDIMM 8
> > >  #define MAXRANKSPERDIMM 2
> > > ==== //training/test_dir/mainTG.c#1 -
> >
> c:\workspace\gary_pc_training\training\test_dir\mainTG.c
> > ====
> > > @@ -20,8 +20,7 @@
> > >
> >
>  #---------------------------------------------------------------------------*/
> > >  /* Perform DQS calibration and test memory */
> > >
> > > -#include <sys\ppc440sp_board.h>
> > > -#include <ppclib.h>
> > > +#include <ppc.h>
> > >  #include <asynclib.h>
> > >  #include <stdio.h>
> > >  #include <sys\tcpiplib.h>
> > > @@ -34,6 +33,7 @@
> > >  #define SDRAM_MICRON           0x2C
> > >
> > >  #define SDRAM_TRUE  1
> > > +#define SDRAM_TRUE  9
> > >  #define SDRyAM_FALSE 0
> > >  #define SDRAM_DDR1  1
> > >  #define SDRAM_DDR2  2
> > >
> > >
> > > Thanks,
> > >
> > >
> > > Gary
> > >
> > > --- On Wed, 5/6/09, David Sitsky <[hidden email]>
> > wrote:
> > >
> > >> From: David Sitsky <[hidden email]>
> > >> Subject: Re: No new browser window opened up
> after
> > clicked on the line number.
> > >> To: "Gary Yang" <[hidden email]>
> > >> Cc: [hidden email]
> > >> Date: Wednesday, May 6, 2009, 3:14 PM
> > >> This happens when the diff you have
> > >> loaded in doesn't match the
> > >> repository associated with the topic.  If
> you
> > have the
> > >> repository set
> > >> to your Perforce depot, and the diff text
> matches
> > the depot
> > >> path, then
> > >> those links will become active again. 
> You'll
> > need to
> > >> create new
> > >> topics whenever you change the repository
> string
> > in
> > >> codestriker.conf.
> > >>
> > >> Cheers,
> > >> David
> > >>
> > >> On Thu, May 7, 2009 at 7:56 AM, Gary Yang
> <[hidden email]>
> > >> wrote:
> > >> >
> > >> > Hi David,
> > >> >
> > >> >
> > >> > I use Perforce and Codestriker 1.9.6. In
> the
> > The
> > >> Codestriker Guide 1.9.5 at the section,
> 3.5.1.
> > Viewing a
> > >> Topic. The last paragraph says below:
> > >> >
> > >> > Each file is broken up into a series of
> > "deltas". At
> > >> the head of each delta block, for both the
> old and
> > new
> > >> versions of the file, there is an indication
> of
> > what line
> > >> number the delta started at. In this
> situation,
> > clicking on
> > >> the "Line 24" link on the left hand side,
> will
> > open a new
> > >> browser window, which will contain the
> complete
> > original
> > >> contents of codestriker/codestriker.pl,
> anchored
> > at line 24.
> > >> Clicking on the "Line 22" link on the right
> hand
> > side will
> > >> contain the complete contents of
> > codestriker/codestriker.pl
> > >> will all of the proposed changes applied.
> > >> >
> > >> > However, when I clicked on the line
> number,
> > there is
> > >> no new browser window opened up. Actually,
> there
> > is no
> > >> hyperlink line under the line number. It is
> > different than
> > >> what I see in the manual. Can you please let
> me
> > know the
> > >> reason?
> > >> >
> > >> >
> > >> > Thanks,
> > >> >
> > >> >
> > >> > Gary
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >>
> > >
> > >
> > >
> > >
> >
>
>
>      
>
> ------------------------------------------------------------------------------
> The NEW KODAK i700 Series Scanners deliver under ANY
> circumstances! Your
> production scanning environment may not be a perfect world
> - but thanks to
> Kodak, there's a perfect scanner to get the job done! With
> the NEW KODAK i700
> Series Scanner you'll get full speed at 300 dpi even with
> all image
> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Codestriker-user mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/codestriker-user
>


     

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/codestriker-user
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: No new browser window opened up after clicked on the line number.

David Sitsky
Administrator
In reply to this post by Gary Yang
Ah now I am with you.

Yes that link no longer exists since a major refactoring of the view
code a few subversions ago.  Most people just clicked on "Parallel",
then horizontally scrolled the browser window if they wanted to see
the old file, or the new file.

Because of limited available time I have, the manual has a number of
old screenshots in it.

Cheers,
David

On Fri, May 8, 2009 at 4:28 AM, Gary Yang <[hidden email]> wrote:

>
> David,
>
> I am not talking about the line numbers used to add comments. It works fine. I am talking about the Line number next to the "Parallel".
>
> At the Codestriker Guide, 3.5.3 Viewing Complete old/new Files. It syas:
>
> As mention in Section 3.5.1, it is possible to view the entire contents of a file in a review in its original form, or in its proposed form, or side-by-side depending on whether the "Line" or "Parallel" link was selected.
> ......
> When a "Line" link is clicked, a new browser window will come up with the contents of the file.
>
>
> I am able to click on the Parallel. It pops up a new browser to show me both original and changed revision. However, the Line number next to the Parallel there is no hyperlink with it. Nothing poped up after I clicked on it. Can you please tell me how to fix it?
>
> Thanks.
>
>
>
> --- On Wed, 5/6/09, David Sitsky <[hidden email]> wrote:
>
>> From: David Sitsky <[hidden email]>
>> Subject: Re: No new browser window opened up after clicked on the line number.
>> To: "Gary Yang" <[hidden email]>
>> Cc: [hidden email]
>> Date: Wednesday, May 6, 2009, 5:45 PM
>> The more recent versions of
>> Codestriker removed the explicit
>> underlines form the line numbers.  If you click on
>> them, a little
>> inline popup window should appear, allowing you to enter a
>> comment.
>>
>> If this is not happening, make sure you are at least using
>> 1.9.8.
>> Also try it with firefox, to make sure its not a browser
>> issue.
>>
>> On Thu, May 7, 2009 at 10:00 AM, Gary Yang <[hidden email]>
>> wrote:
>> >
>> >
>> > Hi David,
>> >
>> > I do not understand your explaination. From my
>> understanding, the diff text matches the depot path. There
>> is a hyperlinked parallel line. A window popped up after I
>> clicked on the Paraelle. It shows two differen revisons of
>> the file. I tried it again. Still, there is no hyperlink
>> with the line number. Below is the detail.
>> >
>> >
>> > in codestriker.conf:
>> >
>> > 'perforce:apache:apache1234@ipcswsvdcp4:1666',
>> >
>> > The Perforce client workspace spec:
>> > p4 client -o
>> > View:
>> >        //training/...
>> //gary_pc_training/training/...
>> >
>> >
>> > p4 diff -du
>> > ==== //training/main.c#10 -
>> c:\workspace\gary_pc_training\training\main.c ====
>> > @@ -30,7 +30,6 @@
>> >
>> >  #include <sys\ppc440sp_board.h>
>> >  #include <ppclib.h>
>> > -#include <asynclib.h>
>> >  #include <stdio.h>
>> >  #include <sys\tcpiplib.h>
>> >  #include <serial.h>
>> > @@ -41,12 +40,13 @@
>> >  /* SDRAM MICRON */
>> >  #define SDRAM_MICRON           0x2C
>> >
>> > -#define SDRAM_TRUE  1
>> > +#define SDRAM_TRUE 2
>> >  #define SDRyAM_FALSE 0
>> >  #define SDRAM_DDR1  1
>> >  #define SDRAM_DDR2  2
>> >  #define SDRAM_NONE  0
>> >  #define MAXDIMMS 2
>> > +#define max     3
>> >  #define MAXRANKS 2     /* Changes le 12/01/05 pour
>> 1.6*/
>> >  #define MAXBANKSPERDIMM 8
>> >  #define MAXRANKSPERDIMM 2
>> > ==== //training/test_dir/mainTG.c#1 -
>> c:\workspace\gary_pc_training\training\test_dir\mainTG.c
>> ====
>> > @@ -20,8 +20,7 @@
>> >
>>  #---------------------------------------------------------------------------*/
>> >  /* Perform DQS calibration and test memory */
>> >
>> > -#include <sys\ppc440sp_board.h>
>> > -#include <ppclib.h>
>> > +#include <ppc.h>
>> >  #include <asynclib.h>
>> >  #include <stdio.h>
>> >  #include <sys\tcpiplib.h>
>> > @@ -34,6 +33,7 @@
>> >  #define SDRAM_MICRON           0x2C
>> >
>> >  #define SDRAM_TRUE  1
>> > +#define SDRAM_TRUE  9
>> >  #define SDRyAM_FALSE 0
>> >  #define SDRAM_DDR1  1
>> >  #define SDRAM_DDR2  2
>> >
>> >
>> > Thanks,
>> >
>> >
>> > Gary
>> >
>> > --- On Wed, 5/6/09, David Sitsky <[hidden email]>
>> wrote:
>> >
>> >> From: David Sitsky <[hidden email]>
>> >> Subject: Re: No new browser window opened up after
>> clicked on the line number.
>> >> To: "Gary Yang" <[hidden email]>
>> >> Cc: [hidden email]
>> >> Date: Wednesday, May 6, 2009, 3:14 PM
>> >> This happens when the diff you have
>> >> loaded in doesn't match the
>> >> repository associated with the topic.  If you
>> have the
>> >> repository set
>> >> to your Perforce depot, and the diff text matches
>> the depot
>> >> path, then
>> >> those links will become active again.  You'll
>> need to
>> >> create new
>> >> topics whenever you change the repository string
>> in
>> >> codestriker.conf.
>> >>
>> >> Cheers,
>> >> David
>> >>
>> >> On Thu, May 7, 2009 at 7:56 AM, Gary Yang <[hidden email]>
>> >> wrote:
>> >> >
>> >> > Hi David,
>> >> >
>> >> >
>> >> > I use Perforce and Codestriker 1.9.6. In the
>> The
>> >> Codestriker Guide 1.9.5 at the section, 3.5.1.
>> Viewing a
>> >> Topic. The last paragraph says below:
>> >> >
>> >> > Each file is broken up into a series of
>> "deltas". At
>> >> the head of each delta block, for both the old and
>> new
>> >> versions of the file, there is an indication of
>> what line
>> >> number the delta started at. In this situation,
>> clicking on
>> >> the "Line 24" link on the left hand side, will
>> open a new
>> >> browser window, which will contain the complete
>> original
>> >> contents of codestriker/codestriker.pl, anchored
>> at line 24.
>> >> Clicking on the "Line 22" link on the right hand
>> side will
>> >> contain the complete contents of
>> codestriker/codestriker.pl
>> >> will all of the proposed changes applied.
>> >> >
>> >> > However, when I clicked on the line number,
>> there is
>> >> no new browser window opened up. Actually, there
>> is no
>> >> hyperlink line under the line number. It is
>> different than
>> >> what I see in the manual. Can you please let me
>> know the
>> >> reason?
>> >> >
>> >> >
>> >> > Thanks,
>> >> >
>> >> >
>> >> > Gary
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >>
>> >
>> >
>> >
>> >
>>
>
>
>
>

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/codestriker-user
Loading...